ESD Worksurface Cleaner

A Minute with Miranda – Charge-Guard™ ESD Surface and Mat Cleaner Wipes

Image 0

Welcome back to “A Minute with Miranda.” This week we will be covering how to clean your ESD Worksurface Mat.

For optimum performance, the ESD worksurface mat should be cleaned regularly using a recommended ESD mat cleaner. Per the ESD Handbook ESD TR20.20, “Ensure that cleaners that are used do not leave an electrically insulative residue common with some household cleaners.” We recommend using Charge-Guard™ ESD Surface & Mat Cleaner Wipes to clean and maintain ESD mats and other worksurfaces. Charge-Guard™ wipes do not contain silicone or other substances that will leave an insulative residue or inhibit the performance of an ESD surface.

It is recommended to test the surface after cleaning to ensure that all insulative contaminants such as dirt and grime have been removed. Charge-Guard™ ESD Surface & Mat Cleaner Wipes will only leave behind a coating with a surface resistance of less than 1 x 10^9 ohms.

8004 - Charge-Guard™ ESD Surface and Mat Cleaner, 25 Wipes
8004 – Charge-Guard™ ESD Surface and Mat Cleaner, 25 Wipes
SHOP OR REQUEST A SAMPLE OF CHARGE-GUARD™ WIPES

A Minute with Miranda – Cleaning an ESD Worksurface Mat

Image 0

Welcome back to “A Minute with Miranda.” This week we will be covering how to properly clean an ESD Worksurface Mat.

For optimum electrical performance, the ESD worksurface mat surface should be cleaned regularly using a recommended ESD mat cleaner. Per the ESD Handbook ESD TR20.20, “Ensure that cleaners that are used do not leave an electrically insulative residue common with some household cleaners.”
We recommend using Reztore ESD Surface and Mat Cleaner. Reztore is alcohol free and does not contain silicone or other substances that will leave an insulative residue or inhibit the performance of the ESD worksurface mats.

After cleaning the ESD worksurface mat with Reztore it is recommended to test the surface to ensure that all insulative contaminates such as dirt and grime have been removed from the mat.
SCS worksurface mats meet the ANSI/ESD STM4.1 and ANSI/ESD S20.20 required limit of 1 x 106 to less than 1 x 109 ohms for Rtt and Rtg and the recommendations of ANSI/ESD S4.1. View the range of Reztore Alcohol Free products here.