In our last post, we talked about the ESD protective packaging requirements for ESD sensitive items and provided you with 6 steps to choose the correct type of packaging. We thought today we could go in a little bit more detail and introduce you to some types of packaging and how to use them. If you read our recent post on Tips to Fight ESD, you will remember how important it is to protect your ESD sensitive items when leaving an EPA. Yet, too often we see customers who have the perfect EPA, but when it comes to transporting and storing their precious components, it’s all falling apart.
Packaging required for transporting and storing ESD sensitive items
During storage and transportation outside of an EPA, it is recommended that ESD sensitive components and assemblies are enclosed in packaging that possesses the ESD control property of shielding. See our last post for more details.
Remember:
- In ‘shielding’ we utilize the fact that electrostatic charges and discharges take the path of least resistance.
- The charge will be either positive or negative; otherwise the charge will balance out and there will be no charge.
- Charges repel so electrostatic charges will reside on the outer surface.
The Faraday Cage effect
A Faraday Cage effect can protect ESD sensitive items in a shielding bag or other container with a shielding layer. To complete the enclosure, make sure to place lids on boxes or containers and close shielding bags.
Types of shielding packaging
The below list gives a few examples of what types of shielding packaging is available on the market. This list is by no means complete; there are many different options out there – just make sure the specifications state “shielding” properties.
- Metal-In Shielding Bags
ESD bags which protect ESD sensitive items. The ESD shielding limits energy penetration from electrostatic charges and discharge. They offer good see-through clarity. Available with and without zipper.
Example of a Metal-In Shielding Bag – Click here for more information - Metal-Out Shielding Bags
Integral antistatic and low tribocharging bags which will not electrostatically charge contents during movement. Bags have an aluminium metal outer layer of laminated film. Available with and without zipper.
Example of a Metal-Out Shielding Bag – Click here for more information - Moisture Barrier Bags
Offer ESD and moisture protection and can be used to pack SMD reels or trays.
Example of a Moisture Barrier Bag – Click here for more information - Cushioned Shielding Bags
These bags combine the “Faraday Cage” and mechanical protection. They shield about twice as well as normal shielding bags of equivalent size.
Example of a Cushioned Shielding Bag – Click here for more information
Additional options for storing ESD sensitive items
Do you have the following in place?
- ESD flooring
- Grounded personnel (using foot grounders)
- Grounded racking
IF (and this is a BIG IF) the above requirements are fulfilled, you can use conductive bags or containers to store your ESD sensitive items. Conductive materials have a low electrical resistance so electrons flow easily across the surface. Charges will go to ground if bags or containers are handled by a grounded operator or are stored on a grounded surface.
Conductive materials come in many different shapes and forms:
Conductive Black Bags
Tough and puncture resistant bags which are made of linear polyethylene with carbon added. The bags are heat sealable.
- Rigid Conductive Boxes
Provide good ESD and mechanical protection. Boxes are supplied with or without high density foam for insertion of component leads or low density foam which acts as a cushioning material. - PCB Containers
Are flat based and can be stacked. They are made of injection moulded conductive polypropylene.
Again, there are many more options available on the market so make sure you do your research.
Note: we do not recommend using conductive packaging to transport ESD sensitive devices. Also, pink antistatic and pink antistatic bubble bags are not suited for storing or transporting ESD sensitive components.
Final thoughts
Packaging with holes, tears or gaps should not be used as the contents may be able to extend outside the enclosure and lose their shielding as well as mechanical protection.
Also, do not staple ESD bags shut. The metal staple provides a conductive path from the outside of the ESD bag to the inside. The use of a metal staple would undermine the effectiveness of the ESD bag making a conductive path for charges outside the bag to charge or discharge to ESD sensitive components inside the bag. To close an ESD bag, it is recommended to heat seal or use ESD tape or labels after the opening of the bag has been folded over. Alternatively, you can use ESD bags with a zipper.