Fairly regularly we are seeing low charging or antistatic Pink Poly bags being used for the wrong application. These bags are made from a tinted polyethylene material with an antistatic coating that can wear away. This turns the bag insulative and high charging over time, making it noncompliant to ANSI/ESD S541 recommendations.
They also lack discharge shielding protection which makes components within the bag susceptible to ESD event damage. It is this distinction that is most important – as Pink Poly bags don’t provide shielding, they should not be used to carry ESD Susceptible (ESDS) items outside the EPA, i.e. when the sensitive item isn’t grounded. Per ANSI/ESD S541-2018, Table 1. ESD Protective Packaging Requirements by Location, Discharge Shielding is Required for Outside the EPA (UPA).
SCS Metallized Shielding bags are constructed from a metalized polyester film and a low charging polyethylene laminate. This provides the bags with a shielding layer that creates a Faraday cage protecting the ESD sensitive components within the bag from possible ESD event damage. The low charging inner layer and outer layer of the bag prevent tribocharging from occurring, minimizing the build-up of ESD charges when handling components. This low charging layer is longer lasting than a pink antistatic bag.
Per ANSI/ESD S541-2018 – Table2. Summary of ESD Protective Properties
“Discharge Shielding“
“Protects packaged items from the effects of static discharge that are external to the package and limits current flow through package”
Per ANSI/ESD S541-2018 – Per 7.3.1 Electrostatic Discharge Shielding
“Electrostatic discharge shielding materials are capable of attenuating an electrostatic discharge when formed into a container such as a bag”
Watch our video for a simple demonstration on how pink poly bags differ from static shielding bags:
For more information on the differences between these two materials, and a demonstration on how to test per ANSI/ESD S11.31 and ANSI/ESD S541 visit this page.
With electronic components getting smaller and more sensitive, it’s important to make sure they are protected from ESD events like static discharge. Per ANSI/ESD S20.20, “Protective packaging is required to store, transport, and protect ESDS electronic items during all phases of production.” Per the new 2018 requirements for ANSI/ESD S541, the shielding requirement was changed that remaining discharge for the bags should be less than 20 nanojules.
One of the more common used bags is a low charging Pink Poly bag. These bags are made from a tinted polyethylene material with an antistatic coating that can wear away. This turns the bag insulative over time, making it noncompliant to ANSI/ESD S541 recommendations. They also lack discharge shielding protection which makes components within the bag susceptible to ESD event damage. Metallized Shielding bags are constructed from a metalized polyester film and a low charging polyethylene laminate. This provides the bags with a shielding layer that creates a Faraday cage protecting the ESD sensitive components within the bag from possible ESD event damage. The low charging inner layer and outer layer of the bag prevent tribocharging from occurring, minimizing the build up of ESD charges when handling components.
Watch this video on Pink Poly vs Static Shielding Bag Testing and learn why Metallized Static Shielding Bags are the best packaging solution offering full protection against ESD events.
Have you been questioned by your quality manager about shelf life on ESD bags? Maybe it’s an internal quality procedure that is being written and you would like to know where the manufacturer stands on the shelf life of ESD packaging. Well today we will address the topic of ESD Static Control bag storage and the expected shelf life.
There are many ways to manufacture an ESD shielding bag with low charging properties on the inner and outer layers. This is the first factor to consider so I will address only the items that I convert here at SCS. In our process, I achieve shielding values via a buried metal layer. The metal layer is laminated between two layers of polyethylene. This process makes a very robust and long- lasting product in terms of shielding values as per ANSI/ESD S541-2018, the electronic industry’s most recognized standard for ESD packaging. Still the metal layer is exposed to oxidization if not stored properly and subject to extreme climate or moisture.
SCS Metal-In shielding bag layers
To achieve the outer and inner low-charging properties, I use a topical anti-stat solution. This provides the outer and inner resistance readings of >/= 1 x 10^4 to < 1 x 10^11 ohms as called out in ANSI/ESD S541-2018 packaging standard. This property is the most vulnerable to change and should be tested frequently.
How does all this pertain to shelf-life you ask? SCS provides a Static Control Bag Storage document with a 1 year warranty from the date of purchase. I have witnessed SCS ESD bags stored in a controlled climate, well-ventilated area that have maintained passing surface resistance results after 5 yrs. on the shelf. Some customers have relied on our Moisture Barrier products to archive various critical products for as long as 20 yrs. They found through extensive testing that SCS had the highest quality and most repeatable results to trust with their archived product.
End users cannot always provide a climate and humidity-controlled atmosphere for our raw material, so it is recommended that you test your bags periodically per the S541 standard and dispose of any materials that are found to be questionable. As a best practice, you can log your products by purchase date or lot number and create an annual spot check audit to assure that your bags are still in compliance. Using a FIFO First In First Out process is critical in keeping your inventory fresh. You can imagine that there are 1000’s of variations to consider when we discuss shelf life. Heat, storage rack conditions, travel method and local climate to name a few, so the points to take away are this:
Test your ESD bags periodically
Avoid extremes
Hot, Cold, sunlight, moisture
Add controls when possible
In a controlled environment, SCS ESD bags have seen 5 yrs. of proven shelf life.
Follow the FIFO process as a best practice for inventory.
SCS warranties the product for a period of 1 year from the date of purchase. You need to audit annually or prior to use as a best practice and assure that your devices are getting the best protection.
If the bags are questionable, recycle the product at your local recycler and order and new lot from SCS – Static Control Solutions.
Thank you, Kevin Cleary ESD Packaging Specialist – Sales Direct Line: (919) 903-1724
In a previous post we learnt how to select the correct ESD bag for your application, we want to focus on the next step: how to correctly use your ESD bag. We’ll use shielding bags as an example as they are the most commonly used ESD bags. However, the below can be applied to all types of ESD bags.
There are a few “dos and do-nots” you should keep in mind to ensure you get the most from your ESD bags. Nothing is worse than investing in all the right equipment and then using it incorrectly rendering all your efforts void. So, on that note, we have comprised a list of 5 tips for you on how to most efficiently use your shielding bags.
5 Tips On Efficient Use of Shielding Bags With ESD Sensitive Items:
1. Enclose Your ESD Sensitive Item with a Shielding Bag
Shielding bags should be large enough to enclose the entire product within. The shielding bag should be closed with a label or tape. Alternatively, you can use a zipper-style shielding bag. Following this advice ensures a continuous Faraday Cage is created which provides electrostatic shielding. This is the only way to ensure ESD sensitive devices placed inside the shielding bag are protected. If you are unfamiliar with the term “Faraday Cage”, scroll to the bottom of this page – we’ve included a more detailed explanation at the end of the post.
Enclose your ESD sensitive item
Please do not staple your shielding bag. The staple punctures the shielding layers and will provide a conductive path from the outside of the shielding bag to the inside. Charges outside the shielding bag could potentially charge or discharge to ESD sensitive components inside the shielding bag.
If you’re unsure as to what the correct size is for your application, catch-up on this post which will provide all the required information.
2. Remove Charges from Shielding Bags
When receiving an ESD sensitive device enclosed in a shielding bag, make sure you place the closed shielding bag on an ESD worksurface before removing the product. This will eliminate any charge that might have accumulated on the surface of the shielding bag.
Remove charges
3. Do Not Overuse Shielding Bags
Re-using shielding bags is acceptable as long as there is no damage to the shielding layer. Shielding bags with holes, tears or excessive wrinkles should be discarded.
Don’t overuse shielding bags
4. Shielding Bags Are Not A Working Surface
Do not use a shielding bag as an ESD worksurface. Although a shielding bag is safe to use around ESD susceptible products, it is not intended to be a worksurface for product. When working on ESD sensitive devices, do so using ESD worksurfaces that are grounded correctly.
Don’t use shielding bags as your ESD worksurface
5. A Shielding Bag Is Not A “Potholder” Or “Glove”
Do not use a shielding bag as an “ESD potholder” or “ESD glove”. This type of use offers no ESD protection to the product.
If you need to handle ESD sensitive devices, make sure you are properly grounded using wrist straps or heel grounders.
Shielding bags are no “ESD glove” or “ESD potholder”
Some of you may have read through this post and have stumbled across the term “Faraday Cage” as you have not come across it before. We’ve also mentioned it before when talking about storing and transporting ESD sensitive items. However, we’ve never actually explained what a Faraday Cage is – so let’s rectify that!
What Is A “Faraday Cage” Or “Faraday Shield”?
A Faraday Cage or Faraday shield is an enclosure formed by conducting material or by a mesh of conductive material. Such an enclosure blocks external static and non-static electric fields. Faraday Cages are named after the English scientist Michael Faraday, who invented them in 1836.
What Is An Example of Faraday Cage Effect?
An impressive demonstration of the Faraday Cage effect is that of an aircraft being struck by lightning. This happens frequently but does not harm the plane or passengers. The metal body of the aircraft protects the interior. For the same reason, a car may be a safe place during a thunderstorm.
Lightning striking an airplane
How Is A Faraday Cage Effect Used In ESD Protection?
In ESD Protection, the Faraday Cage effect causes charges to be conducted around the outside surface of the conductor. Since similar charges repel, charges will rest on the exterior and ESD sensitive items on the inside will be ‘safe’.
Examples of ESD control products that provide a Faraday Cage or shielding include Metal-In and Metal-Out Shielding bags.
When Is ESD Shielding Packaging Used?
ESD shielding packaging is to be used particularly when transporting or storing ESD sensitive items outside an ESD Protected Area.
ESD Packaging Standards For Outside An EPA
Per Packaging Standard ANSI/ESD S541 clause 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides:
Low charge generation.
Dissipative or conductive materials for intimate contact.
A structure that provides electrostatic discharge shielding.“
Additional ESD Definitions
Other helpful ESD related definitions from the ESD Association Glossary ESD ADV1.0 include:
Faraday Cage: “A conductive enclosure that attenuates a stationary electrostatic field.” Electrostatic discharge (ESD) shield: “A barrier or enclosure that limits the passage of current and attenuates an electromagnetic field resulting from an electrostatic discharge.” Electrostatic shield: “A barrier or enclosure that limits the penetration of an electrostatic field.”
So, hopefully we’ve clarified a few things today when it comes to the “shielding” property by explaining the phenomenon of the “Faraday Cage”. Don’t forget to implement our tips when it comes to using your ESD bags!
If your company has an ESD Control Program per ANSI/ESD S20.20 in place, you need to define ESD protective packaging for ESD sensitive items (ESDs).
“The Organization shall prepare an ESD Control Program Plan that addresses each of the requirements of the Program. Those requirements include: – Training – Product Qualification – Compliance Verification – Grounding / Equipotential Bonding Systems – Personnel Grounding – ESD Protected Area (EPA) Requirements – Packaging Systems – Marking” [ANSI/ESD S20.20 clause 7.1 ESD Control Program Plan]
But where do you start? Don’t panic – we’re here to help and we’ll be following the guidelines set-out in the ESD Standard.
Definition and Purpose of ESD Protective Packaging ESD Protective Packaging covers any materials coming into direct contact with ESD sensitive devices during handling, shipping and storage. You don’t need to worry about secondary or exterior packaging unless it’s used for ESD protection purposes.
“Packaging for ESD sensitive items is commonly derived by modifying existing packaging to prevent the packaging itself from causing static damage. The packaging generally retains physical and environmental protective qualities. ESD protective packaging has been modified further to prevent other sources of static electricity from damaging a packaged item.“ [ANSI/ESD S541 Foreword]
The fundamentals of ESD control include grounding all conductors in the EPA. ESD packaging will have special material composition to lower the resistance so that when grounded, electrostatic charges will be removed to ground thus protecting your ESD sensitive devices inside.
“Transportation of electrostatic sensitive devices requires packaging that provides protection from electrostatic hazards in the transportation or storage system. In the case of an EPA designed with continuous grounding of all conductors and dissipative items (including personnel), packaging may not be necessary.” [ANSI/ESD S541 clause 6. Packaging Application Requirements]
Example of ESD Packaging
Packaging is to be determined for all material movements inside and outside of the ESD Protected Area (EPA). Best practice is to define the required packaging or material handling item on the product’s bill of materials. Remember: the ESD packaging is just as important as a component part.
Customer contract packaging can take precedence, but otherwise “the organization shall define ESD protective packaging requirements, both inside and outside the EPA per ANSI/ESD S541 or in accordance with the contract, purchase order, drawing or other documentation necessary to meet customer requirements.” [ANSI/ESD S20.20 clause 8.4 Packaging]
Choosing your ESD Protective Packaging Numerous factors need to be taken into consideration when choosing your ESD protective packaging including the “environment and device sensitivity.” [ANSI/ESD S541 Annex A.1 Environment and Device Sensitivity]
It is best recommended to follow these 6 steps:
Understand the product sensitivity You can gather information about the ESD sensitivity of an item by either measuring it in-house, contacting the manufacturer of the product or by analyzing published ESD sensitivity data.
Determine the distribution environment for the packaged product Knowing the environment in which the product is shipped and how it will be handled is extremely important. Humidity and temperature are the main factors to consider when it comes to choosing the right type of packaging for your ESD sensitive items. If items are susceptible to moisture, a barrier material should be chosen to prevent excessive humidity exposure. On the other hand, condensation may occur inside the packaging if temperatures vary around the dew point of the established interior conditions. In those instances, desiccant should be put inside of the package or the air should be removed from the package before shipment.
A Moisture Barrier Bag – click here for more information
Determine the type of packaging system that is best suited for the intended application The first step is to choose low charging or static dissipative materials when in contact with ESD sensitive devices. Many companies also require the packaging to protect the contents from a direct discharge or exposure to electric fields. In addition to these requirements, there are further questions that need to be asked:
Returnable or reusable packaging?
Disposable or one-time only packaging?
Aesthetic requirements for packaging?
Select and test packaging materials Test methods are explained in ANSI/ESD S541 and will classify packaging materials as conductive, static dissipative or insulative.
Design a packaging systemOnce the ESD sensitivity and distribution environment have been evaluated and available materials have been selected, the design of the packaging system can begin. Per the ANSI/ESD S541, the following general rules apply:
Inside an EPA: “Packaging used within an EPA (that satisfies the minimum requirements of ANSI/ESD S20.20) shall be:
Low charge generation.
Dissipative or conductive materials for intimate contact.Items sensitive to < 100 volts human body model may need additional protection depending on application and program plan requirements.” [ANSI/ESD S541 clause 6.1 Inside an EPA]
Outside an EPA: “Transportation of sensitive products outside of an EPA shall require packaging that provides:
Low charge generation.
Dissipative or conductive materials for intimate contact.
A structure that provides electrostatic discharge shielding.”
[ANSI/ESD S541 clause 6.2 Outside an EPA]
Example of ESD Packaging
In addition to these guidelines, there may be additional factors that should be considered, e.g.:
Cost/value relationship: The cost of the packaging compared to the total value of the contents is important. Some companies choose less expensive packaging for less valuable parts.
Handling: If rigorous handling is expected, cushioned packaging may need to be considered.
Test the final packaging design for effectiveness It is highly recommended to subject packages to the type of hazards that can be expected during shipments. These tests can, for example, involve the following:
High voltage discharges to the exterior of the packaging
Simulated over the road vibration
Drop tests
Environmental exposure
Final thoughts on ESD Protective Packaging Now that you have an understanding of the factors to consider when choosing your ESD Protective Packaging, you’re ready to implement the above guidelines. ESD packaging comes in all sorts of shapes and forms so bear in mind to not just look at bags when deciding what type of packaging to choose.
Also, remember that ESD packaging should be marked. We’ll cover the specifics in a later post.
